VMware安装RedHat 6(64位)报错问题

本机安装的是WIN 7 ,详细版本是:Windows 7 Ultimate, 32-bit 6.1.7601, Service Pack 1 。虚拟机版本:7.1.2 build-301548.在虚拟机上安装RED HAT ENTERPRISE LINUX 6 64版本时,香港服务器,报如下错误:

You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host is VT-capable, but VT is disabled.

This is usually because VT has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. Please:

(1) Verify that the BIOS/firmware settings enable VT and disable ‘trusted execution.’

(2) Power-cycle the host, if either of these BIOS/firmware settings have been changed.

(3) Power-cycle the host, if you have not done so since installing VMware Workstation.

(4) Update the host’s BIOS/firmware to the latest version.

For more detailed information, see ?id=152.

Continue without 64-bit support?

然后不能启动,香港虚拟主机,服务器空间,然后报如下错误:

This kernel requires an x86-64 CPU, but only detected an i686 CPU.Unable to boot – please use a kernel appropriate for your CPU.更多VMWare硬件要求的信息参见:Hardware and Firmware Requirements for 64-Bit Guest OperatingSystems

?externalId=1901

只需在BIOS下开启虚拟化技术,即设置virtualization technology选项即可。(Intel系列的CPU芯片需要支持EM64T和VT,并且需要BIOS支持才行。)进入BIOS后,选择Security选项,然后选择Virtualization选项,进去后把Inter(R) VirtualizationTechnology选项设置为Enable后,退出重启电脑,即可顺利安装RED HAT ENTERPRISE LINUX 6 64位操作系统.

记住:有些主板BIOS设置里面可能没有Virtualization选项,必须先去配置里面选择Virtualization,然后选择View(可见),然后去Security里面Enable即可。

乐观者在灾祸中看到机会;悲观者在机会中看到灾祸

VMware安装RedHat 6(64位)报错问题

相关文章:

你感兴趣的文章:

标签云: