Ubuntu配置CPU温度、风扇转速、硬盘温度监控[附下载]

看到网上有一些朋友装好Ubuntu后无法利用主板的传感器监控硬件状态，把自己的安装心得写出来，希望对刚接触Ubuntu的人有些帮助。

这是以前的老文章，仅供参考。

首先说下我的配置,4年前的机器:

代码:

CPU：AMD Athlon XP 2200+

主板：Soltek SL-KT400-C

操作系统：Ubuntu Feisty 7.04

由于CPU的散热风扇效果不是很好，夏天最热的时候CPU温度高到70几度，所以在Windows下有采用CPU idle的方式行降温。安装Ubuntu后对机器的状态自然就比较重视了，特别关心CPU的温度，所以经过Google,Baidu后总结得到的安装方法：

第一步：安装lm-sensors和sensors-applet(也可以选用后面新找到的一个软件CompTemp Monitor)，打开终端输入：

代码:

sudo apt-get install lm-sensors sensors-applet

根据提示键入Root密码，然后等待下载并安装完后关闭终端。在你想要显示传感器温度的面板位置右键，，选择“添加到面板”菜单命令，在列表中选择“Hardware SensorsMonitor”后单击“添加”按钮即可添加该Applet程序。能直接检测到传感器那最好了。如果没有检测到传感器(我的就没有显示)，显示”Nosensors found”则转到下一步。

第二步：手动配置传感器：

Ubuntu安装的时候可能没有对传感器进行配置,需要手动配置传感器。lm-sensors软件提供了一个非常好的命令：sensors-detect，会自动侦测所需模块,类似Windows软件常见的“下一步”模式，引导你配置好传感器,向导中的问题按提示回答“Yes”或者”ENTER”.一般一路下去输入”Yes”/”ENTER”就可以了,我检测配置的时候就一路Yes和ENTER.

在终端输入：

代码:

sudo sensors-detect

过程：

代码:

linuxidc@Ubuntu-desktop:~$ sudo sensors-detect# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)This program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you’re doing.We can start with probing for (PCI) I2C or SMBus adapters.Do you want to probe now? (YES/no): yesProbing for PCI bus adapters…Use driver `i2c-viapro’ for device 0000:00:11.0: VIA Technologies VT8233A/8235 South BridgeWe will now try to load each adapter module in turn.Module `i2c-viapro’ already loaded.If you have undetectable or unsupported adapters, you can have themscanned by manually loading the modules before running this script.To continue, we need module `i2c-dev’ to be loaded.Do you want to load `i2c-dev’ now? (YES/no): yesModule loaded successfully.We are now going to do the I2C/SMBus adapter probings. Some chips maybe double detected; we choose the one with the highest confidencevalue in that case.If you found that the adapter hung after probing a certain address,you can specify that address to remain unprobed.Next adapter: SMBus Via Pro adapter at 0400Do you want to scan it? (YES/no/selectively): yesClient found at address 0x4cHandled by driver `lm90′ (already loaded), chip type `lm90’Client found at address 0x4eProbing for `National Semiconductor LM75’… NoProbing for `Dallas Semiconductor DS1621’… NoProbing for `Analog Devices ADM1021’… NoProbing for `Analog Devices ADM1021A/ADM1023’… NoProbing for `Maxim MAX1617’… NoProbing for `Maxim MAX1617A’… NoProbing for `TI THMC10’… NoProbing for `National Semiconductor LM84’… NoProbing for `Genesys Logic GL523SM’… NoProbing for `Onsemi MC1066’… NoProbing for `Maxim MAX1619’… NoProbing for `National Semiconductor LM82/LM83’… NoProbing for `Maxim MAX6659’… NoProbing for `Maxim MAX6633/MAX6634/MAX6635’… NoProbing for `ITE IT8201R/IT8203R/IT8206R/IT8266R’… NoProbing for `Fintek F75111R/RG/N (GPIO)’… NoProbing for `Fintek F75121R/F75122R/RG (VID+GPIO)’… NoClient found at address 0x50Probing for `Analog Devices ADM1033’… NoProbing for `Analog Devices ADM1034’… NoProbing for `SPD EEPROM’… Success!(confidence 8, driver `eeprom’)Probing for `EDID EEPROM’… NoProbing for `Maxim MAX6900’… NoClient found at address 0x51Probing for `Analog Devices ADM1033’… NoProbing for `Analog Devices ADM1034’… NoProbing for `SPD EEPROM’… Success!(confidence 8, driver `eeprom’)Client found at address 0x69Some chips are also accessible through the ISA I/O ports. We have towrite to arbitrary I/O ports to probe them. This is usually safe though.Yes, you do have ISA I/O ports even if you do not have any ISA slots!Do you want to scan the ISA I/O ports? (YES/no): yesProbing for `National Semiconductor LM78′ at 0x290… NoProbing for `National Semiconductor LM78-J’ at 0x290… NoProbing for `National Semiconductor LM79′ at 0x290… NoProbing for `Winbond W83781D’ at 0x290… NoProbing for `Winbond W83782D’ at 0x290… NoProbing for `Winbond W83627HF’ at 0x290… NoProbing for `Silicon Integrated Systems SIS5595’… NoProbing for `VIA VT82C686 Integrated Sensors’… NoProbing for `VIA VT8231 Integrated Sensors’… NoProbing for `AMD K8 thermal sensors’… NoProbing for `IPMI BMC KCS’ at 0xca0… NoProbing for `IPMI BMC SMIC’ at 0xca8… NoSome Super I/O chips may also contain sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): yesProbing for Super-I/O at 0x2e/0x2fTrying family `ITE’… YesFound `ITE IT8705F Super IO Sensors’ Success!(address 0x290, driver `it87′)Trying family `National Semiconductor’… NoTrying family `SMSC’… NoTrying family `VIA/Winbond/Fintek’… NoProbing for Super-I/O at 0x4e/0x4fTrying family `ITE’… YesFound `ITE IT8705F Super IO Sensors’ Success!(address 0x290, driver `it87′)Trying family `National Semiconductor’… NoTrying family `SMSC’… NoTrying family `VIA/Winbond/Fintek’… NoNow follows a summary of the probes I have just done.Just press ENTER to continue: ENTERDriver `lm90′ (should be inserted):Detects correctly:* Bus `SMBus Via Pro adapter at 0400’Busdriver `i2c-viapro’, I2C address 0x4cChip `lm90′ (confidence: 6)Driver `eeprom’ (should be inserted):Detects correctly:* Bus `SMBus Via Pro adapter at 0400’Busdriver `i2c-viapro’, I2C address 0x50Chip `SPD EEPROM’ (confidence: 8)* Bus `SMBus Via Pro adapter at 0400’Busdriver `i2c-viapro’, I2C address 0x51Chip `SPD EEPROM’ (confidence: 8)EEPROMs are *NOT* sensors! They are data storage chips commonlyfound on memory modules (SPD), in monitors (EDID), or in somelaptops, for example.Driver `it87′ (should be inserted):Detects correctly:* ISA bus address 0x0290 (Busdriver `i2c-isa’)Chip `ITE IT8705F Super IO Sensors’ (confidence: 9)I will now generate the commands needed to load the required modules.Just press ENTER to continue: ENTERTo make the sensors modules behave correctly, add these lines to/etc/modules:#—-cut here—-# I2C adapter driversi2c-viapro# Chip driverslm90eepromit87#—-cut here—-

#上面的内容是关键,列举了启动时要载入的模块,检测结果和我在Windows下用EVERESTUltimate软件查得到主板的情况一致:VIA KT400的芯片组和传感器ITE IT8705F, National LM90 (ISA290h, SMBus4Ch),如果上述检测未能找到出你主板上的传感器,查看/usr/share/doc/lm-sensors/doc/lm_sensors-FAQ.html 或者去lm-sensors wiki: 查找解决方法.

Do you want to add these lines to /etc/modules automatically? (yes/NO)yes

积极的人在每一次忧患中都看到一个机会，