笔记本安装SUSE10.3，显卡为N卡Nvidia GeForce Go 7300,如下面英文安装方法安装openSUSE 10.3 -AMD64，按提示完成安装
openSUSE 10.3-AMD64 It is recommended to use YaST for installation of the NVIDIAdriver. There are several reasons for this. First, it’ssimple. Second, and this is the most important one, you won’t need torecompile the nvidia kernel module after a kernel update.
Update your Kernel via YOU (YaST Online Update). Use
YaST -> Software -> Installation Source -> Add
Protocol: HTTP Server Name: : download.nvidia.com Directory on Server: /opensuse/10.3
to add the NVIDIA ftp server as additional installation source.Now use
YaST -> Software -> Software Management
to install the NVIDIA driver. Select the following packages:
x11-video-nvidiaG01 nvidia-gfxG01-kmp-default
1-Click-install:
If you own one of the following NVIDIA graphics chips
0x0110 GeForce2 MX/MX 400 0x0111 GeForce2 MX 100/200 0x0112 GeForce2 Go 0x0113 Quadro2 MXR/EX/Go 0x0170 GeForce4 MX 460 0x0171 GeForce4 MX 440 0x0172 GeForce4 MX 420 0x0173 GeForce4 MX 440-SE 0x0174 GeForce4 440 Go 0x0175 GeForce4 420 Go 0x0176 GeForce4 420 Go 32M 0x0177 GeForce4 460 Go 0x0178 Quadro4 550 XGL 0x0179 GeForce4 440 Go 64M 0x017A Quadro NVS 0x017C Quadro4 500 GoGL 0x017D GeForce4 410 Go 16M 0x0181 GeForce4 MX 440 with AGP8X 0x0182 GeForce4 MX 440SE with AGP8X 0x0183 GeForce4 MX 420 with AGP8X 0x0185 GeForce4 MX 4000 0x0188 Quadro4 580 XGL 0x018A Quadro NVS 280 SD 0x018B Quadro4 380 XGL 0x018C Quadro NVS 50 PCI 0x01A0 GeForce2 Integrated GPU 0x01F0 GeForce4 MX Integrated GPU 0x0200 GeForce3 0x0201 GeForce3 Ti 200 0x0202 GeForce3 Ti 500 0x0203 Quadro DCC 0x0250 GeForce4 Ti 4600 0x0251 GeForce4 Ti 4400 0x0253 GeForce4 Ti 4200 0x0258 Quadro4 900 XGL 0x0259 Quadro4 750 XGL 0x025B Quadro4 700 XGL 0x0280 GeForce4 Ti 4800 0x0281 GeForce4 Ti 4200 with AGP8X 0x0282 GeForce4 Ti 4800 SE 0x0286 GeForce4 4200 Go 0x0288 Quadro4 980 XGL 0x0289 Quadro4 780 XGL 0x028C Quadro4 700 GoGL
select instead the packages:
x11-video-nvidia nvidia-gfx-kmp-default
1-Click-install:
Use “sax2 -r” for X.Org configuration.
People who aren’t afraid of recompiling the nvidia kernel module oreven reinstalling the nvidia driver each time the kernel has beenupdated and want or need to use the latest and greatest nvidia drivercan use the following steps 1-3. The others should use theinstructions above using YaST and skip the steps below.
1) Kernel sources must be installed and configured. Usually this meansinstalling the ‘kernel-source’, ‘make’ and ‘gcc’ packages with YaST2.
2) Use the nvidia installer for 100.14.19.
sh NVIDIA-Linux-x86_64-100.14.19-pkg2.run -q
3) Configure X.Org with
sax2 -r -m 0=nvidia (0 is a digit, not a letter!)
NOTE: There is no need to try to enable 3D support. It’s already enabled, when the nvidia driver is running.
IMPORTANT: You need to recompile and install the nvidia kernel module after each kernel update.
sh NVIDIA-Linux-x86_64-100.14.19-pkg2.run -K
由于是一键安装所以方法比较简单，，也不易出错。按提示重起系统。
要么读书、要么旅行，灵魂和身体，必须有一个在路上。
