我所使用的是CentOS虚拟机，在那个环境下有dhcp服务，本来用的好好的，可是突然出现了如下错误：
错误：determining IP information for eth0 … failed; no link present . Check cable?
开始还以为是网线掉了，结果好的。
后来去网上百度，Google了一下，结果出现的都是
Getting a DHCP Address in a Red Hat Linux 9.0 Virtual MachineWhen a Red Hat Linux 9.0 guest operating system tries to get a DHCP address, the attempt may fail with an error message that states the link is down. On ESX Server, this happens only if you are using the vlance driver for your network connection.To work around this problem, become root (su -) and use a text editor to edit the following files in the guest operating system. If only one of these files exist, make the change for that file only./etc/sysconfig/network-scripts/ifcfg-eth[n]/etc/sysconfig/networking/devices/ifcfg-eth[n]In both cases, [n] is the number of the Ethernet adapter — for example, eth0.Add the following section to each of these two files:check_link_down () {return 1;}
Then run the command ifup eth[n] (where [n] is the number of the Ethernet adapter) or restart the guest operating system.
结果我试了一下还是不行，，就是出错改变了变成了如下错误
determining IP information for eth0 … failed;
后来想了一下修改ifcfg-eth0，把原来的dhcp改为static，整个配置改成静态的，然后再重启网络，就发现可以了。
在CentOS 7上利用systemctl添加自定义系统服务
CentOS 7.0下编译安装LNMP
CentOS 7.0体验与之前版本的不同
CentOS 7 正式版发布下载
U盘安装64位CentOS 6.5方法
Win7安装64位CentOS 6.4双系统详细图文教程
CentOS与Windows双系统安装注意事项记录
UEFI+GPT安装Windows8和CentOS双系统
本文永久更新链接地址：
别人失去了信心，他却下决心实现自己的目标。
