我使用过的Linux命令之route – 显示和操作IP路由表
我使用过的Linux命令之route – 显示和操作IP路由表
本文链接:http://codingstandards.iteye.com/blog/1125312
? (转载请注明出处)
?
用途说明
route命令用于显示和操作IP路由表(show / manipulate the IP routing table)。要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现。在Linux系统中,设置路由通常是为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置为Linux机器的默认路由。要注意的是,直接在命令行下执行route命令来添加路由,不会永久保存,当网卡重启或者机器重启之后,该路由就失效了;可以在/etc/rc.local中添加route命令来保证该路由设置永久有效。本文中的例子中会验证这一点。
?
常用参数
格式:route
格式:/sbin/route
用于打印路由表(display the current routing table)。
在非root用户使用时需要使用完整路径执行route命令。
?
格式:route -n
格式:/sbin/route -n
用于打印路由表,加上-n参数就是在输出的信息中不打印主机名而直接打印ip地址。像netstat命令也有此参数。
?
格式:route add default gw {IP-ADDRESS} {INTERFACE-NAME}
用于设置默认路由(adds a default route, which will be used if no other route matches),其中,
参数{IP-ADDRESS): 用于指定路由器(网关)的IP地址(Specify router IP address);
参数{INTERFACE-NAME}: 用于指定接口名称,如eth0(Specify interface name such as eth0)。使用/sbin/ifconfig -a可以显示所有接口信息。
adds a default route (which will be used if no other route matches). All packets using this route will
be gatewayed through “mango-gw”. The device which will actually be used for that route depends on how we
can reach “mango-gw” – the static route to “mango-gw” will have to be set up before.
?
格式:route add -net {NETWORK-ADDRESS} netmask {NETMASK} dev {INTERFACE-NAME}
添加到指定网络的路由规则,其中
参数{NETWORK-ADDRESS}: 用于指定网络地址
参数{NETMASK}: 用于指定子网掩码
参数{INTERFACE-NAME}: 用于指定接口名称,如eth0。
adds a route to the network 192.56.76.x via “eth0”. The Class C netmask modifier is not really necessary
here because 192.* is a Class C IP address. The word “dev” can be omitted here.
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
This is an obscure one documented so people know how to do it. This sets all of the class D (multicast)
IP routes to go via “eth0”. This is the correct normal configuration line with a multicasting kernel.
?
格式:route add -net {NETWORK-ADDRESS} netmask {NETMASK} reject
设置到指定网络为不可达,避免在连接到这个网络的地址时程序过长时间的等待,直接就知道该网络不可达。
This installs a rejecting route for the private network “10.x.x.x.”
?
格式:route del -net {NETWORK-ADDRESS} netmask {NETMASK} dev {INTERFACE-NAME}
格式:route del -net {NETWORK-ADDRESS} netmask {NETMASK} reject
用于删除路由设置。参数指定的方式与route add相似。
?
?
route命令输出的路由表字段含义如下:
?????? Destination 目标
????????????? The destination network or destination host. 目标网络或目标主机。
?????? Gateway 网关
????????????? The gateway address or ‘*’ if none set. 网关地址,如果没有就显示星号。
?????? Genmask 网络掩码
????????????? The? netmask? for? the? destination net; ‘255.255.255.255’ for a
????????????? host destination and ‘0.0.0.0’ for the default route.
?????? Flags? Possible flags include 标志,常用的是U和G。
????????????? U (route is up) 路由启用
????????????? H (target is a host) 目标是主机
????????????? G (use gateway) 使用网关
????????????? R (reinstate route for dynamic routing)
????????????? D (dynamically installed by daemon or redirect)
????????????? M (modified from routing daemon or redirect)
????????????? A (installed by addrconf)
????????????? C (cache entry)
????????????? !? (reject route)
?????? Metr